Extron electronic 4G Manuel d'utilisateur télécharger pdf

Speciﬁcations — FOXBOX 4G DVI/VGA Series

Extron FOXBOX 4G DVI, FOXBOX 4G VGA Series Fiber Optic Transceivers • Specications

The FOXBOX 4G DVI and FOXBOX 4G VGA consist of a transmitter

(FOXBOX 4G DVI/VGA Tx) and a receiver (FOXBOX 4G DVI/VGA Rx) with one or two ﬁber

optic cables linking the two units. They are available in singlemode or multimode versions.

For the VGA models, the analog RGB input signal is digitized pixel for pixel in the transmitter, sent

digitally through the ﬁber cable, and converted back to analog RGB in the receiver.

The analog audio signal(s) is (are) digitized in the transmitter, sent through the ﬁber cable, and

converted back to analog audio in the receiver.

These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825,

FDA 21, CFR 1040.10, and FDA 21 CFR 1040.11.

Optical ﬁber interconnection between transmitter and receiver

Number/type �� 1 or 2 ﬁber optic

Only one ﬁber is required to transmit video, audio, and unidirectional data. A second ﬁber is

required to transmit return data for bidirectional control/communication.

Connectors �� 2 LC connectors

Operating distance

Singlemode �� 30 km (18�75 miles) with singlemode (SM) cables with a FOXBOX 4G SM

Multimode �� 300 m (985') with 62�5 µm multimode (MM) cables with a FOXBOX 4G MM

1 km (3280') with 50 µm multimode (MM) cables with a FOXBOX 4G MM

2 km (6561') with 50 µm 2000 MHz bandwidth laser optimized multimode

cable with a FOXBOX 4G MM

Operating distance is approximate. These are typical maximum distances that may vary depending

on factors such as ﬁber type, ﬁber bandwidth, connector splicing, losses, modal or chromatic

dispersion, environmental factors, and kinks.

Nominal peak wavelength�� 850 nm for FOXBOX 4G MM, 1310 nm for FOXBOX 4G SM

Data rate �� 4�25 Gbps

Transmission power

Singlemode �� -5 dBm, typical

Multimode �� -5 dBm, typical

Maximum receiver sensitivity

Singlemode �� -18 dBm, typical

Multimode �� -12 dBm, typical

Optical loss budget

Singlemode �� 13 dB, maximum

Multimode �� 7 dB, maximum

Video — FOXBOX 4G VGA Tx/Rx

Signal type �� VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs

Gain �� Unity

Pixel data bit depth �� 8 bits per channel, 3 channels (R, G, B)

Maximum resolution �� 1600x1200 @ 60 Hz, digitized pixel for pixel; higher resolutions up to

2048x1120, undersampled

Video input — FOXBOX 4G VGA Tx

Number/signal type �� 1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs

Connectors �� 1 female 15-pin HD

Nominal level �� 0�7 Vp-p for RGB

Minimum/maximum levels �� Analog: 0�3 V to 0�75 Vp-p with no offset, terminated

Impedance �� 75 ohms

Horizontal frequency �� 24 kHz to 100 kHz

Vertical frequency �� 40 Hz to 120 Hz

Return loss �� <-40 dB @ 5 MHz

1 2 3

7.6-031309-D7 3

Résumé du contenu

Page 1

Speciﬁcations — FOXBOX 4G DVI/VGA Series1Extron FOXBOX 4G DVI, FOXBOX 4G VGA Series Fiber Optic Transceivers • SpecicationsN The FOXBOX 4G DVI and FO

Page 2

Speciﬁcations — FOXBOX 4G DVI/VGA Series, cont’dExtron FOXBOX 4G DVI, FOXBOX 4G VGA Series Fiber Optic Transceivers • Specications2Video output — FOX

Page 3 - 7.6-031309-D7

3Extron FOXBOX 4G DVI, FOXBOX 4G VGA Series Fiber Optic Transceivers • SpecicationsImpedance �� 18k ohms unbala