Extron electronic Extron Electronics Switch RGB 560 AKM Manuel d'utilisateur télécharger pdf (Page 10)

Installation and Operation, cont’d

RGB 500 AKM and RGB 560 AKM Installation and Operation2-2

Installation and Operation

Front Panel Features

Figure 2 — RGB 500 AKM front panel

Figure 3 — RGB 560 AKM front panel

Signal output and interface power cables — Five BNC female connectors

for video output: red, green, blue, horizontal sync (black), and vertical sync

(yellow); one 5-pole 3.5mm captive screw connector for audio output (see

“Audio output connector” on page 2-6); and one 3-pole 3.5mm captive screw

connector for 12–24V AC or DC power (see “Power connector” on page 2-7).

Power indicator LED — The interface has a built-in autopower feature.

When power is applied but no signal is present, the LED lights amber. When

a signal is present at the video/sync input, the interface powers on, and the

LED lights green.

Min/Max LED — This LED lights briefly when the horizontal shift knob is

turned to its minimum or maximum adjustment limit.

Horizontal shift knob — Use this knob to adjust the horizontal position of

the display image left or right to center it each time a new computer is

attached to the interface.

The horizontal shift control has no mechanical limits to rotation. When the

minimum or maximum limit of the control is reached, the Min/Max LED

lights briefly.

DDSP will disable horizontal shift control.

RGB 560 AKM with ADSP

BUFFERED

LOCAL OUT

MIN/MAX

H. SHIFT

AUDIO

ID PIN 4

ID PIN 11

INPUT

RGB 500 AKM with ADSP

AUDIO INPUT

MIN/MAX

H. SHIFT

HIGH Z

5 6

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 24 25

Pas de commentaire

Extron electronic Extron Electronics Switch RGB 560 AKM Manuel d'utilisateur Page 10