Extron-electronic Fiber Optic Transmitters-Receivers FOX 2G Tx AV Manuel d'utilisateur télécharger pdf

Speciﬁcations — FOX 2G AV Series

Extron FOX 2G Tx AV, FOX 2G Rx AV Series Fiber Optic Transmitters-Receivers • Specications

The FOX 2G AV consists of a transmitter (FOX 2G Tx AV) and a receiver (FOX 2G Rx AV) with

one or two ﬁber optic cables linking the two units.

The analog video input signal is digitized pixel for pixel in the transmitter, sent digitally through

the ﬁber cable, and converted back to analog video in the receiver.

The analog audio signal(s) is (are) digitized in the transmitter, sent through the ﬁber cable, and

converted back to analog audio in the receiver.

These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825,

FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.

Optical ﬁber interconnection between transmitter and receiver

Number/type �� 1 or 2 ﬁber optic

Only one ﬁber is required to transmit video, audio, and unidirectional data. A second ﬁber is

required to transmit return data for bidirectional control/communication.

Connectors �� 2 LC connectors

Operating distance

Singlemode �� 30 km (18�75 miles) with singlemode (SM) cables with a FOX 2G AV SM

Multimode �� 500 m (1640') with 62�5 µm multimode (MM) cables with a FOX 2G AV MM

1 km (3280') with 50 µm multimode cables with a FOX 2G AV MM

2 km (6561') with 50 µm, 2000 MHz bandwidth laser optimized multimode

cables with a FOX 2G AV MM

Operating distance is approximate. These are typical maximum distances that may vary depending

on factors such as ﬁber type, ﬁber bandwidth, connector splicing, losses, modal or chromatic

dispersion, environmental factors, and kinks.

Nominal peak wavelength�� 850 nm for FOX 2G AV MM, 1310 nm for FOX 2G AV SM

Data rate �� 2�125 Gbps

Transmission power

Singlemode �� -5 dBm, typical

Multimode �� -5 dBm, typical

Maximum receiver sensitivity

Singlemode �� -18 dBm, typical

Multimode �� -12 dBm, typical

Optical loss budget

Singlemode �� 13 dB, maximum

Multimode �� 7 dB, maximum

Video

Gain �� Unity

Standards

Input �� NTSC 3�58, NTSC 4�43, PAL, SECAM, autodetected

Output �� NTSC 3�58, PAL (follows vertical rate)

Decoder type �� Adaptive 2D, digital comb ﬁlter

Video input — transmitters

Number/signal type �� 1 component (Y, R-Y, B-Y), S-video, composite video

Connectors �� 1 x 3 female BNC or 1 female 4-pin mini DIN for S-video

Nominal level �� 1�0 Vp-p for Y of component video and S-video, and for composite video

0�7 Vp-p for R-Y, B-Y of component video

0�3 Vp-p for C of S-video

Minimum/maximum levels �� Analog: 0�3 V to 1�5 Vp-p with no offset

1 2 3

7.6-031709-D6 3

Résumé du contenu

Page 1

Speciﬁcations — FOX 2G AV Series1Extron FOX 2G Tx AV, FOX 2G Rx AV Series Fiber Optic Transmitters-Receivers • SpecicationsN The FOX 2G AV consists o

Page 2

Speciﬁcations — FOX 2G AV Series, cont’dExtron FOX 2G Tx AV, FOX 2G Rx AV Series Fiber Optic Transmitters-Receivers • Specications2Impedance ��

Page 3 - 7.6-031709-D6

3Extron FOX 2G Tx AV, FOX 2G Rx AV Series Fiber Optic Transmitters-Receivers • SpecicationsBaud rate and protocolControl ��

Commentaires sur ces manuels

Pas de commentaire

Extron-electronic Fiber Optic Transmitters-Receivers FOX 2G Tx AV Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Récepteurs et amplificateurs Extron-electronic Fiber Optic Transmitters-Receivers FOX 2G Tx AV. Extron electronic Fiber Optic Transmitters-Receivers FOX 2G Tx AV User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Extron-electronic Fiber Optic Transmitters-Receivers FOX 2G Tx AV